HISEER GSWW60, Инструкция по установке, эксплуатации и обслуживанию

Страница: 23 / 39

22
Adjusting Parameter Values
Display Procedures
After inputting password and enter into the parameter setting mode.
Press <Plus> or <Minus> to select the
parameter code, and press <Enter> to
confirm.
The default value of the parameter will
start flashing, allowing you to make a
change.
Press <Plus> or <Minus> to increase or
decrease the value, and press <Enter> to
confirm.
Continuously press <Esc> to exit out of the current level and back to the desired menu level.
User Settings
Para-
Meter
Descriptions
De-
fault
Min. Max. Unit Res
Priv-
ilege
ST01 Setting temperature at cooling mode (End User) 12 ST11 ST12 ºC 0.1 0
ST02 Setting temperature at heating mode (End User) 40 ST13 ST14 ºC 0.1 0
ST03 Setting temperature difference at cooling mode 1 0 10 ºC 0.1 0
ST04 Setting temperature difference at Heating mode 1 0 10 ºC 0.1 0
ST05
Setting temperature at heating for compensation
function
20 0 30 ºC 0.1 0
ST06 Compensation factor for heating compensation function 6 0 30 - 0.1 0
ST07
Outdoor temperature to start the boiler or electric
heater
0 -10 20 ºC 0.1 0
ST08
Boiler or electric heater stop outdoor temperature
difference
5 1 20 ºC 0.1 0
ST09 Hot water temperature 50 ST15 ST16 ºC 0.1 0
ST10 Hot water temperature difference 3 1 10 ºC 0.1 0
Controller