HISEER GSWW60, Инструкция по установке, эксплуатации и обслуживанию

Страница: 12 / 39

11
Electrical Connection
Q13 Q14 Q34 Q24 Q44 Q54 Q64
Q23 Q74 Q84 Y1 G0 Y2
A+ B- GND
RJ45
G0 PE
D1 M D3 D2 M M D4 D5 X1 GND X3 X2 X4 X5 GND GND +5V X6 +24V
RS485
!
C
G
SIEMENS
RWR470.10
Terminal Assigments Terminal Assignments
G Power supply AC/DC 24 V Q13 Supply 1 (AC 24 V 1230 V)
G0 Power supply ground Q14 Compressor 1
PE Saftey ground Q24 Compressor 2
Q34 Indoor water pump
X1 Inlet water temperature of indoor side Q44 Outdoor water pump
X2 Outlet water temperature of indoor side Q54 4-way valve
X3 Outdoor ambient temperature Q64 Electric heater or boiler
X4 Hot water temperature
X5 Outlet water temperature of outdoor side Q23 Supply 2 (AC 24 V 1230 V)
X6
Exhaust gas temperature/return gas
temperature
Q74 Hot water pump or revert valve
GND Common reference point for analog input Q84 Alarm
+5 V DC 5 V power output for active sensor Y1 Analog output 2, 0...10 V
+24 V DC 24 V power output for active sensor GND Common reference point
Y2 Analog output 2, 0...10 V
D1 Water flow switch
D2 Low pressure switch A+ A+ connector for RS485
D3 high pressure switch B- B- connector for RS485
D4 Air conditioner switch GND Optional for RS485 communication
D5 Hot water switch RJ45
Service interface for parameters
uploading and downloading
M Common reference point for digital input
Warning:
Electrical connections and servicing must be carried out under the supervision of a qualified
electrician
．
Electrical installation and wiring must be carried out in accordance with Local
Standards
．
Electrical Connection