Installation Instructions
UM19.5A User Manual, 99159, March 2017
9
Power Connection
The HIS-UM19.5 is available with either AC or DC power input.
AC power input models are powered by 100 to 240 VAC, 0�8/0�4 A, 60/50 Hz� Connect the AC
power cable to the power input port on the rear of the monitor� Connect the other end into a
nearby outlet�
DC power input models are powered by 9�6 to 36�6 VDC, 2�5 to 0�65 A, Class 2 or SELV/LPS�
Install Touch Screen Driver
Applies to touch screen monitors only� Instructions below apply to Windows systems� Both Serial
and USB ports are present on all touch screen monitors, but only one should be used to connect
the touch screen interface to the monitor�
All touch screen monitors are shipped with a CD-ROM that contains documentation and drivers
for all major operating systems. To be sure that you have the most current information, please
check the following Internet address:
http://www�HopeIndustrial�com/Touchscreen_Drivers�htm
IMPORTANT!
If you will be using a USB connection,
install the touch screen driver first,
and then
connect the USB cable. If you will be using a Serial connection,
connect the Serial
cable first,
and then install the touch screen driver�
USB Connection
1� Select the appropriate driver for your operating system.
a� If downloading from the web address listed above, select the appropriate
driver for your operating system.
b� If using the included CD, insert it into the host computer's CD-ROM drive.
If the CD does not automatically run, browse the contents of the CD and
open the
READ�ME�FIRST�htm
file in a web browser. Select the appropriate
driver�
2� Click to "Run" the software when prompted� Follow on-screen instructions to
download and execute the touch screen driver installation�
