Hirschmann MACH104-20TX-F Series, Руководство пользователя

Страница: 27 / 38

MACH104
Release 09/09
27
„
Device state
These LEDs provide information about conditions which affect the opera-
tion of the whole device.
If the manual adjustment is active on the “FAULT” signal contact, then the
detected error display is independent of the setting of the signal contact.
P - Power
(green/yellow LED)
Glowing green
MACH104-20TX-F, MACH104-20TX-F-4PoE:
Supply voltage is on.
MACH104-20TX-FR:
Supply voltages 1 and 2 are on.
Glowing yellow MACH104-20TX-FR: Supply voltage 1 or 2 is on.
Not glowing MACH104-20TX-F, MACH104-20TX-F-4PoE:
Supply voltage is below minimum value.
MACH104-20TX-FR:
Supply voltages 1 and 2 are below minimum value.
RM - Ring Manager (green/yellow LED)
Glowing green
RM function active, redundant port disabled
Glowing yellow RM function active, redundant port enabled
Not glowing RM function not active
Flashing green Incorrect configuration of the HIPER-Ring (e.g. the ring is not
connected to the ring port).
Sb StandBy - stand-by mode (green LED)
Glowing green
Stand-by mode enabled.
Not glowing No stand-by mode.
FAULT - signal contact
(red LED)
Glowing red
Signal contact 1 is open, i.e. it is reporting an error.
Not glowing Signal contact 1 is closed, i.e. it is not reporting an error.
RM and Stand-by - display saving processes of the AutoConfiguration Adapter (ACA)
Flashing alternately
Error during saving process.
LEDs flash synchronously, two
times a second Loading configuration from the ACA.
LEDs flash synchronously,
once a second Saving the configuration in the ACA.
FAULT
RM
Sb
P