3. Assembly and installation procedure HIRO 160 Q
23
On the lower set of rollers there are two eccentric
guide rollers which are secured at the side with a
grub screw. Loosen the grub screws and adjust
the guide rollers so that they are just touching the
guide rail tube. After carrying out this adjustment,
re-tighten the grub screws.
Check that the earthing connection is properly
attached and that the loop is touching the guide
rail.
Lubricate the charging pins and check for easy
action.
Lubricate the copper bars at each lift stop and
charging point.
Clean the guide rail tubes and rollers with
methylated spirit.
