12
Connection and Setup
Once returned to the KVM-W app, it will indicate that it is establishing measurement
communication with the device as seen below.
If this connecting times out the first try, then press Retry. It should connect within a couple of
seconds. If measurement connection is unable to be established, go back to the iPhone Settings
menu and make sure you are still connected to the device’s WiFi. Once connected, it will display
the ID of the device below the right measurement display.
The LED indicator on the KVM-W will be a glowing a solid color when it is connected to a mobile
device through WiFi. If there is no device connected to it, then it will automatically go into sleep
mode, and the LED will blink once every 30 seconds. If you are charging the device while it is not
connected to any mobile device, then the LED will blink every 5 seconds until it is done charging,
in which it will then turn a solid color. If the LED does not blink at all after a minute, then the
batteries are dead and it will need to be recharged.
