Hipo INKJET plotter manual
22
⑴
preheat the nozzles
If you click it, every graph will start with the following short vertical lines,
especially under conditions of low temperature to avoid blurring at the
beginning of printing.
⑵
Ink-saving mode
This mode generates thinner lines, while the otherwise non-ink-saving
mode generates thicker lines.
⑶
delete files
With this option, the file will be automatically deleted when the plotting
is done, and the plotting times is non-optional, implied for only '1 'time. If this
function is not selected, the files will be saved after plotting.
⑷
autostart
With this function, the plotter will go straight into automatic plotting
once turned on.
⑸
automatically shut down after plotting
With this function the plotter will automatically shut down when all the
files have been finished.
⑹
plotting times
Every time a file is select, the printing times can be changed
accordingly. Close the output centers and the 'plotting times' will automatically
restore to ‘1’, and will not affect the subsequent plotting.
⑦
Graphic plotting
There are two modes of plotting a file, “plot” and “plot with a designated
starting point”.
⑴
plot
Click ‘file’—‘plot’, there will be the following interface, showing the
progress of the plotting. See Figure 5-14:
