Hipo INKJET plotter manual
14
5-5). With this function, it is convenient to choose different plotting origins on
the plotting paper when printing it.
If you close the current graph, the numerical value of the designated
parallel movement will be reserved. So when there’s no need of specifying
starting point of plotting, please choose “automatic parallel move”. If the
parallel move amount is too large, the graph may exceed the printing area,
resulting in incomplete printing. Then the software will give a prompt (see
Figure 5-8); press “ok” to refill the parallel move data.
Figure 5-5 Parallel Move
Figure 5-8 over parallel move prompt
④
Line width settings
The greater the line width value is, the wider the line is and therefore the
clearer graph. But at the same time, it consumes ink faster. Generally, select
the default line width “1” or “2” is fine. If “Ignore the line width setting of the
graph file” is selected, the line width will comply with the "Default Line Width"
when printing. If not, the line width will comply with hpgl2 file formed by CAD
when printing, and has nothing to do with the "Default Line Width". But if the
hpgl2 file does not specify line width, it will still comply with the "Default Line
Width".
(5)
Graphic displays
Click “file”-“open”, there will be a dialog box to select a graphic file, and a
mini-marker will be displayed at the bottom. As soon as the path and type of
the file is selected, the next time you click “open” will directly point to this path.
