- 5 -
◆ Adjustment of the brush
Check the height of the brush.
•
As in the picture on the right, set the brush to an approximately level
position.
•
Ensure that the edge of the brush is grazing the screw’s head.
•
If the height of the brush is either too low or too high, orientation
and transfer of the screws will be seriously affected.
•
If adjustment is necessary, adjust it by loosening the brush height
adjusting screw.
Ensure that the edge of the brush
is grazing the screw's head.
Adjustment screw
for the brush
Brush
Screws
Turn the power switch on
& off, and set the brush on
the level.
