- 5 -
5. Turn the count ON/OFF
Press F1 Button for more than 2 sec. to turn the counter
ON/OFF
(Note) The way of setting the functions is common except how to set the counter ON/OFF.
■
Others
■
Precautions in the Unit Operation
●
When this unit is used in combination with the existing HIOS external counter, the driver counter does not
synchronized with the external counter. So, use them based on the external counter function.
Otherwise, turn off the driver’s counting function before use.
・
Combination Available with External Counter Models Power Unit
BLOP-STC3 with the Screw Counter
Separate Counter BLOP-SC1
●
Appropriate operation environment.
・
Do not use the unit in an environment where the ambient temperature is outside the range of +5 to 40 ºC.
・
In an area with static electricity, use this unit only after removing the static electricity.
The count is to be returned to
the default value during the
screw fastening operation.
Pressing the F3 button for 2 seconds or more, resets the screw fastening count
value.
If you fasten a screw after the
driver turns counterclockwise:
There may be some difference in results of motor revolutions after the driver
turns counterclockwise as the start position may have changed.
In this case, the start position needs to be reset by fastening a screw before
starting actual fastening again in order to avoid errors.
"
－－－
" is shown on the
display.
Once the cumulative usage count exceeds 1 million, "
－－－
" blinks on the
display and the screwdriver is locked.
In such case, overhaul or maintenance is required. Please contact your dealer
or HIOS.
Temporarily unlock the screwdriver
Press and hold F2 and F3 buttons at the same time.
To see the version of
screwdriver.
Press and hold F1 button
→
Press F3 button (deactivate screw-counter)
→
Press and hold F1.
The current version will be displayed following the "HIOS" text.
Activate screw-counter if necessary.
