HIOS HM-10, Руководство по эксплуатации

Страница: 7 / 20

- 6 -
5-2. Set the bit end of the target screwdriver to the center of the head screw of Fidaptor.
◎ Important
Notes when fixing Fidaptor:
(1) In order to have the bit set right in the center of the head screw of
Fidaptor, you need to fix Fidaptor by fastening the four screws on the
side evenly.
(2) The bit tip should be engaged precisely in the head screw of Fidaptor
for measurement (it should be correctly aligned with the thrust
direction and the center of the screw.)
(3) Especially, when you use it in the automatically controlled system, it
should be aligned with the center of the Z-axis.
6. Set the switch for measurement unit change to your desired unit.
MODE
TRAK
PEAK
RESET
OFF
O N
POWER
MADE IN JAPAN
N m
lbf in
kgf cm
・
・
・
HM
Unit converter
Switch
7. Set the mode switch to TRACK and turn the zero adjustment knob for zero adjustment.
MODE
TRAK
PEAK
RESET
OFF
O N
POWER
MADE IN JAPAN
N m
lbf in
kgf cm
・
・
・
HM
Turn the knob for zero adjustment.
(Note) Zero adjustment is not available with the PEAK position.
Check if “000” is displayed.
Set the mode switch to TRACK.
8. Set the mode switch to PEAK.
MODE
TRAK
PEAK
RESET
OFF
O N
POWER
MADE IN JAPAN
N m
lbf in
kgf cm
・
・
・
HM
Set the mode switch to PEAK.
After measurement, clear the value with the RESET button.