Hioki SW1001, Инструкция по эксплуатации

Страница: 92 / 164

88
Message List
Message
[ ]: Omissible
Data
[ ]: Omissible,
( ): Response data
Description Reference
:ABORt
Reset of the scan operation.
p. 100
:SYSTem:PRESet
Initialize the device.
(Same setting as
*
RST
)
p. 106
:SYSTem:ERRor?
(<Error No.>,<Error
message>) Queries and clears the error
information.
p. 100
:SYSTem:BACKup
Backup of the setting.
p. 105
:SYSTem:CTYPe?
<Slot No.>
(<Manufacturer
name>,<Model
name>,<Serial No.>)
Queries the slot module information.
p. 105
:SYSTem:MODule:WIRE:MODE
<Slot No.>,<WIRE2/
WIRE4/TP4>
Sets the connection method.
p. 96
:SYSTem:MODule:WIRE:MODE?
<Slot No.>
(<WIRE2/WIRE4/TP4>)
Queries the connection method.
:SYSTem:MODule:SHIeld
<Slot No.>,<OFF/GND/
TERMinal1/TERMinal2/
TERMinal3/T1T3>
Switches the shield.
p. 97
:SYSTem:MODule:SHIeld?
<Slot No.>
(<OFF/GND/TERMinal1/
TERMinal2/TERMinal3/
T1T3>)
Queries the shield switching.
:SYSTem:MODule:DELay
<Slot No.>,<Time/MIN/
MAX/DEF>
Sets the channel delay time.
p. 98
:SYSTem:MODule:DELay?
<Slot No.>
(<Time>)
Queries the channel delay time.
:SYSTem:MODule:COUNt?
<Slot No.>,<Relay No.>
(<Relay opening/closing
frequency>)
Queries the relay opening/closing
frequency.
p. 106
[:ROUTe]:CLOSe
<CH>
Selects and queries the channel.
p. 98
[:ROUTe]:CLOSe?
(<CH>)
[:ROUTe]:OPEN
Opens all relays.
p. 98
[:ROUTe]:SCAN
<Scan list> Scan list registration
p. 99
[:ROUTe]:SCAN?
(<Scan list>) Queries the scan list.
[:ROUTe]:SCAN:ADD
<Scan list> Adds to the scan list.
p. 99
[:ROUTe]:SCAN:REMove
Deletes the scan lists.
p. 99
[:ROUTe]:SCAN:SIZE?
(<Addable count>)
Queries the number of scan lists that
can be added.
p. 100
:TRIGger:SOURce
<STEP>
Sets the trigger source for scan
operation.
p. 100
:TRIGger:SOURce?
(<STEP>)
Queries the trigger source for scan
operation.