Hioki PR8111, Инструкция по эксплуатации

Страница: 29 / 44

3.2 Basic Measurement
25
1
Start Measurement
1
Move the ZERO/MEAS switch to the MEAS position.
The pens will move in response to input signals.
2
Move the START/STOP/FEED switch to the START position.
Paper will be fed through the instrument, and recording will start.
Stop Measurement
1
Move the START/STOP/FEED switch to the STOP position to
stop feeding paper through the instrument.
Paper will stop moving through the instrument.
2
Place the pen lever in the UP (middle) position to raise the
pens.
Remove the Recording Paper
If you’re using fanfold paper, tear off the paper along the perforated line.
To feed paper through the instrument
You can use the START/STOP/FEED switch to feed paper through the in-
strument.
Moving the switch to the FEED position causes paper to be fed
through the instrument. There are four feed speeds. When you
press and hold the switch in the
FEED position for at least 2
seconds, the feed speed will increase.
Cap the Pens
Lift each pen toward you and cap it.