Hioki MO HiTESTER 3452, Инструкция по эксплуатации

Страница: 61 / 90

7
―――――――――――――――――――――――――――
Chapter 2 Measurement
――――――――――――――――――――――――
WARNING
Never touch the object being measured
immediately after measuring. There is a danger
of electric shock from the charge accumulating
during high voltage testing.
Discharge the subject conductor after
measurement. (Refer to Section 2.3, "Discharging
function.")
Before taking a measurement, check the
position of the function switch. Setting the
position incorrectly may cause damage to the
object being measured or any other connected
equipment, since depending on the position of
the function switch, the 3452 may output a high
voltage.
CAUTION
･ Always turn the MEASURE switch off after use.