background image

Operating Precautions

6

Follow these precautions to ensure safe operation and to obtain the full benefits of 
the various functions.

• Before using the instrument for the first time, verify that it operates normally to 

ensure that no damage occurred during storage or shippi ng. If you find any dam-
age, contact your dealer or Hioki representative.

• Before using the instrument, make sure that the insulation on the cables is undam-

aged and that no bare conductors are improperly exposed. Using the instrument in 
such conditions could cause an electric shock, so contact your dealer or Hioki rep-
resentative for replacements.

• Operating temperature and humidity: 0 to 40°C at 80% RH or less (non-conden-

sating)

• Temperature and humidity range for guaranteed accuracy: 23±5°C, 80%RH or less

Operating Precautions

Before Use

Instrument Installation

Avoid the following locations that could cause an accident or damage to the 
instrument.

Exposed to direct sunlight
Exposed to high tempera-
ture

In the presence of corrosive 
or explosive gases

Exposed to water, oil, other 
chemicals, or solvents
Exposed to high humidity or 
condensation

Exposed to strong electro-
magnetic fields
Near electromagnetic radia-
tors

Exposed to high levels of 
particulate dust

Near induction heating sys-
tems
(e.g., high-frequency induc-
tion heating systems and IH 
cooking utensils)

Subject to vibration

The maximum operating (ambient) temperature for the LR8431-20 
is 40°C. Do not attempt to use in higher temperature environ-
ments. 

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Содержание LR8431-20
































Отзывы: