Hioki LR5092, Инструкция по эксплуатации

Страница: 81 / 148

7.2 Setting the Collector from the LR5000 Utility Program
75
3
7
Cha
p
ter 7
Using t
h
e LR500
0 Utili
ty Program
1
Select the logger to which you want to save the settings in [Model] . (When
adding)
2
Setting the [Basic Settings] .
3
Settings on the [Recording Method] tab.
Continued

Model

comment
Enter a comment to describe the logger as needed.
Power save
setting
Enable or disable the power save setting (p.23).
CH1 comment
CH2 comment
Enter a comment to describe the measurement channel as needed.
Note: Comments may consist of up to 20 characters.

The following characters are not allowed: \, /, :, *, ?, ", <, >, and |.
1
2
Click this tab.
See:
P.81
* This is not displayed if the Add button was clicked in "2" (p.74).
3
When you want to know more about how to edit the logger settings:
* This section explains editing settings using the LR5001 Humidity Logger as an
example. For details on the setting items of each of the loggers, refer to “Making
Settings from the LR5000 Utility Program” in the instruction manuals of the cor-
responding loggers.