Hioki LR5092, Инструкция по эксплуатации

Страница: 29 / 148

3.2 Settings List
23
3
3
Chapt
e
r 3 Sett
ings (
W
hen Neces
sary)
Power Saving (Collector)
Power save setting
(LR5000 Utility Program)
If this is set to ON (enabled), the logger
will run in power saving mode. (The dis-
play turns off if no operation is per-
formed for approximately 30 seconds.)
The display turns on again when a but-
ton is pressed or communication is
performed. This prolongs the life of the
batteries.
(p.24) (p.75)
Sync to PC Time
(LR5000 Utility Program)
Sends the time of the computer to the
collector.
Not settable (p.74)
Range Select the measurement range. (p.24)
Refer to the
instruction
manuals of
LR5051.
Preheat
Outputs a preheat signal that is syn-
chronized to measurement performed
with the logger. This can be used to
control the power of various sensors.
(p.24)
Refer to the
instruction
manuals of
LR5041,
LR5042 and
LR5043.
Filter
Enables noise components to be
removed and the influence of chatter-
ing to be eliminated.
(p.24)
Refer to the
instruction
manuals of
LR5051.
Setting Item Setting Description Collector
LR5000 Util-
ity Program