Hioki LR5092, Инструкция по эксплуатации

Страница: 87 / 148

7.2 Setting the Collector from the LR5000 Utility Program
81
3
7
Cha
p
ter 7
Using t
h
e LR500
0 Utili
ty Program
Connect the logger to which you want to send the settings to the collector, and then
send the settings.
See:
"3.3 Sending Measurement Condition Settings to Logger" (p.26)
Other Functions of the Edit Settings Dialog Box
Sending Settings to Logger
Logger Settings
A dialog box appears. (See the diagram be-
low.) Refer to the logger settings saved to
the computer, and then apply the settings.
Save Settings*
Saves settings to a computer file.

(The [Send comment to logger] set-
ting is not saved.)

In the dialog box that appears, specify
the location and name of the destina-
tion file (extension.conf).
Open Settings*
Loads settings from a computer file. In
the dialog box that appears, specify the
location and name of the saved settings
file (extension.conf).
*: Appears only when [Show the settings of the
[Save Settings] and [Open Settings] buttons.] is
selected on the Options screen.
Select the logger of the settings you
want to import.
1
Click.
2
Refer to Settings Dialog Box