Hioki HiTESTER 3415-02, Инструкция по эксплуатации

Страница: 26 / 42

14
―――――――――――――――――――――――――――
Chapter 2 Making Measurements
――――――――――――――――――――――――
2.7 Switching Between Celsius and
Fahrenheit
2.8 Switching On the Laser Marker
Beam (3415-02)
2.9 Turning the Power Off
･
If, with the power off, the MEAS key is
pressed to turn the power on while the
▲
key
is being held down, the temperature display
will be set to show the temperature in
degrees Celsius (
℃
).
･
However if, with the power off, the MEAS key
is pressed to turn the power on while the
▼
key is being held down, the temperature
display will be set to show the temperature in
degrees Fahrenheit (
°
F).
Switch the laser marker beam on and off by
pressing the
▲
key during measurement, or
while the display shows HOLD , MAX , or MIN .
While the laser marker beam is on, the mark
appears in the display.
The product has an auto power off function.
The power goes off after 15 seconds if no
control action is performed.
If you need to check the measured
temperature value again, just press the
MEAS key once.