Hioki FT3424, Инструкция по эксплуатации, Страница: 120 / 166

36
Retaining the Measured Value after a Set Amount of Time (Timer Hold Function)
The measured value will be retained once the
set amount of time has elapsed.
( and appear, and a
continuous beep sounds for 3 sec.)
When is pressed again, the hold
state is canceled, and the timer hold function
is not activated.
( and go off.)
‡
Pressing while the timer hold function is active
(while the timer is counting down) will cause the measured value
to be retained. At this moment, the timer hold function is not
activated. (
goes off.)
‡
While the measured value is retained, the range cannot be
switched.
www. .com
information@itm.com 1.800.561.8187