Hioki DT4281, Руководство по дистанционному управлению

Страница: 10 / 14

DT4281,DT4282 DIGITAL MULTIMETER Remote Operation Manual
P10/14
Command Explanation
:SYST: CONDUCT Set the threshold of continuity check.
Syntax :SYST: CONDUCT <data×1>
<data>
Index of threshold “0”
～
“3”
Example; “:SYST: CONDUCT 1”
Response “OK” or “CMD ERR”
:SYST:DIODE Set the threshold of diode test.
Syntax :SYST: DIODE <data×1>
<data>
Index of threshold “0”
～
“6”
Example; “:SYST: DIODE 1”
Response “OK” or “CMD ERR”
:SYST:DBM Set the standard impedance of dBm.
Syntax :SYST: DBM <data×1>
<data>
Index of impedance “00”
～
“19”
Example; “:SYST: DBM 15”
Response “OK” or “CMD ERR”
:SYST:INIT Put the meter to power-on-reset state.
Syntax :SYST: INIT
Response “OK”