Hioki 9754, Инструкция по эксплуатации, Страница: 22 / 30

2.3 When Connecting to Instruments other than
18
Influence of
conductor
position

0.4% or less
(Based on f=15 kHz 10 A sine wave input, in
the center of the clamp opening)
Residual current
characteristic 40 mA or less
(At f=15 kHz, 10 A, lead wire with 18 mm or
less round-trip distance between lines)
Input
impedance " Input impedance (typical characteristics)"
(

p.20)
Operating
temperature
and humidity
0 to 40

C (32 to 104

F),
80%RH or less (no condensation)
Storage
temperature
and humidity
-10 to 50

C (14 to 122

F),
80%RH or less (no condensation)
Operating
environment Indoor, altitude up to 2000 m (6562 feet)
Diameter of
measurable
conductors 20 mm (0.79") or less
Measurable
conductor Insulated conductor
Cable length Sensor cable approx. 2 m (6.56 feet)
Dimensions • Sensor
Approx. 176W

69H

27D mm
(6.93"W

2.72"H

1.06"D)
• Termination
Approx. 27

55H

19D mm
(0.27"W

0.11"H

0.04"D)
Mass Approx. 450 g (15.9 oz.)
Applicable
standards
Safety
EMC
EN61010
EN61326
Accessory Instruction Manual