Hioki 9754, Инструкция по эксплуатации, Страница: 12 / 30

1.2 Names and Functions of Parts
8
1.2 Names and Functions of Parts
Front Panel
(1) Clamp
(3) Sensor head
(2) Slider
(4) BNC connector
(1) Clamp Clamps around the conductor to be mea-
sured.
(2) Slider Used to open and close the clamp. Always
use this slider when opening and closing the
clamp. When closing, push the slider all the
way until it clicks shut. This will lock the
clamp and keep it from opening.
(3) Sensor head This clamps the conductor being measured
and carries out the actual current measure-
ment. It is a precision assembled compo-
nent, including a molded section and ferrite
core. It may be damaged if subjected to sud-
den changes in ambient temperature, or
mechanical strain or shock, and therefore
great care should be exercised in handling it.
(4) BNC
Connector
Outputs the current waveform of the conduc-
tor being measured at a constant rate (0.1V/
A). Connect to the input terminal of the 3145-
20 NOISE HiLOGGER.