Hioki 9636-01, Инструкция по эксплуатации

Страница: 14 / 32

5
―――――――――――――――――――――――――――
Chapter 2 Specifications
――――――――――――――――――――――――
NOTE
1. Function Mode Indication
This area shows the measurement function and
mode.
1P_P 1
φ
P Meter
1P_PF 1
φ
PF Meter
3P_PF 3
φ
PF Meter
HARM_I Current harmonics
HARM_U Voltage harmonics
2. Range Indication
This area shows the current and voltage ranges.
When auto-ranging is enabled, the auto-selected
range is indicated within parenthesis, as in "AUTO
(600V)"
3. Measured Value Display
Each measurement value is shown.
4. Remaining Battery Indication
The remaining battery charge in the 3286 (-20) is
shown.
5. LEAD/LAG Indication
Phase lead and lag of the current relative to voltage
is shown.
6. RS-232C Indication
Shows RS-232C communications.
It is on during the communication.
It goes on and off while waiting for the
communication.
It is off when there is no vacancy in the COM port.