Hioki 3561, Руководство пользователя

Страница: 130 / 190

7.6 Message Reference
124
Query Comparator Judgment Results
(Resistance Measurement)
Syntax Query
:CALCulate:LIMit:RESistance:RESult?
Response <HI/ IN/ LO/ OFF/ ERR>
Example Query
:CALC:LIM:RES:RES?
Response
HI
(Voltage Measurement)
Syntax Query
:CALCulate:LIMit:VOLTage:RESult?
Response <HI/ IN/ LO/ OFF/ ERR>
Execute Statistical Functions
Syntax Command
:CALCulate:STATistics:STATe
<1, 0, ON or OFF>
Query
:CALCulate:STATistics:STATe?
Response <ON or OFF>
Example Command
:CALC:STAT:STAT ON
Query
:CALC:STAT:STAT?
Response
ON
About the Statistical Calculation function
Data samples can be acquired by the following three methods:
• Press the
TRIG
key
• Apply an EXT I/O TRIG signal
• Send the
∗
TRG
command
The :CALCulates:STATistics:STATe command does not
clear calculation results.
When the valid data count is zero,
σ
n-1
returns 0.
Clearing calculation results does not disable the Statistical
Calculation function.
The upper limit of Cp and CpK is 99.99. Cp and CpK values
greater than 99.99 are returned as 99.99.
The lower limit of Cp and CpK is 0. Cp and CpK values less than 0
are returned as 0.00.
Clear Statistical Calculation Results
Syntax Command
:CALCulate:STATistics:CLEAr