Hioki 2D THERMO HiTESTER, Инструкция по эксплуатации

Страница: 52 / 70

40
―――――――――――――――――――――――――――
Chapter 5Transfer Function
――――――――――――――――――――――――
200 msec
Data
1st 2nd
n
n+1st
Power ON
→
5.3.2 Data Timing
Temperature measurement data (133 bytes) is
transmitted automatically at 200 ms intervals.
Transmission of temperature measurement data takes
approximately 40 ms.
Measurement data is sent repeatedly, so the header
data must first be detected before receiving the
following 133 bytes to process the data. The header
data cannot be detected if it is not distinct from the
temperature measurement data. Processing is
therefore required to cope with this situation, such
as clearing the receipt buffer if no data is received
within a preset time interval.