shown by the example that follows. The stabilization is the necessary condition
to allow aerial part movements.
MANUAL STABILIZATION:
It’s also possible to move the outriggers one by one pressing the blue button
(number 2) and following the indications given on the display. Once all the
outriggers are touching the ground, automatic stabilization remains the
recommended procedure.
AUTOMATIC OUTRIGGERS RETRACTION:
To put the machine in transport configuration aerial part must be closed and
aligned, then, keeping pressed the yellow button (number 1), all the outriggers
should be completely lifted until the end of their stroke.
AERIAL PART MOVEMENTS
To move the aerial part the remote control must
be positioned in its basket support. Aerial part
movements are possible only when machine is
stabilized and therefore when the MACHINE
STABILIZED icon appears in position 5 of the
display. If one stabilization condition is missing,
when a joystick is moved the display indicates the
missing condition with “FAIL” as follows.
ST”X” FAIL indicates that outrigger n. ”X” is not touching
the ground.
INCL FAIL means that the machine is not levelled within
the inclination clearance.
LOAD FAIL means that basket is overloaded (more than
230Kg into the basket so more than about 280 Kg read by
the input menu).
BASKET FAIL means that the remote control is not
properly placed on its basket support (it does not feel the
remote control support magnet).
PEDAL (OPTIONAL) FAIL means that pedal option is
activated and pedal is not properly pressed in order to
allow the movement.
AUTOST FAIL means auto-stabilization procedure not
complete properly.
OK
AUTOSTAB
WAIT
ST1 NO GND
ST2 NO GND
ST3 NO GND
ST4 NO GND
AUTS
STEP: 1
AUTOSTAB
WAIT
ST1 GND
ST2 GND
ST3 GND
ST4 GND
AUTS
STEP: 49
MACHINE
STABILIZED
ICON ON
THE
DISPLAY
BASKET FAIL
ST1 FAIL
INCL FAIL