Hino Motors 300 Series, Руководство по монтажу

Страница: 83 / 169

6 - 3 - 1
KK-XZU215C
SPARE POWER TERMINALS
If you must take an electrical power supply for the body from
the chassis, take it from the spare power supply.
Spare power supplies and positions
[NOTE]
(1) The permissible current to be taken from spare power terminal is determined from the capacity of the
fuse and wire size. Make sure that the maximum load (current) of the installed equipment must be kept lower current than the permissible capacity to be able to take from spare power terminal.
(2) Be sure to keep the lower current value than the alternator generated capacity when switched on the
original and additional equipment same time to avoid over discharging electricity of the battery
.
(3) Using length show the wire length from fuse to each terminal (pole) of the spare outlet.
Be sure to make circuit using the appropriate kind, size and length of the wire followed by the table described in this page.