Hino Motors 300 Series, Руководство по монтажу

Страница: 100 / 169

7 - 1
7. PAINTING
KK-XZU215C
TOP COAT PAINTING
Take a care to the following points, when required to repaint it by a
customer.
1) Sanding
When repainting, perform to sand the original coat carefully not
to be left any part no-sanded, in order to improve the adhesion
of top coat paint. And, never remove off sealant, adhesive
agent at connecting parts of the metal sheet.
[Sanding surface]
2) How to Choose Top Coat Paint
(1) When painting on the metal parts
Hino recommends urethane-type, natural air drying paint to be
used, which have superior characteristics as in painting finish
quality, color fade-out, comparing with lacquer-type paint. The
top coat should be at least 30 µ thick.
(2) When painting on the resin parts
• Hino recommends paint for the resin parts to be used,
which is best matched to the characteristics of the resin
parts (step rubber, front-grill, front garnish, etc.) and also,
can prevent to lowering the shock resistant force at low
temperature.
• Then, Avoid to paint backside of the resin parts as its
shock resistant force lowers further down with the both
side to be painted, of the resin parts.
• Cab step, made of polypropylene material, can not be
painted.