10
|
hinkley.com
INSTALLING THE MONTING PLATE
1
2
3
NOTE:
Be sure the power is off before installing.
Remove one of the three screws on the mounting hub
located on the fan motor. Loosen the other 2 screws. (Do
not remove) (Fig. 2)
Place the key holes on the rubber gasket and adapter plate
over the 2 screws previously loosened, turn the adapter
plate until it locks in place at the narrow section of the key
holes. Secure by tightening the 2 screws previously
loosened and the one previously removed.
Raise the bottom cover against the adapter plate with 2
screws until snug.
Restore power is ready for operation.
Fig. 2
Screws
Screws
Mounting Hub
(bottom of motor)
Adapter
Plate
Bottom Cover
Rubber Gasket
4
INSTALLING THE LED BULBS AND GLASS SHADES
1
2
3
Fig. 3
NOTE:
Be sure the power is off before installing.
Install 8 x 4-W LED bulbs (included).
Raise the glass shade against the light holder and turn
clockwise until snug, DO NOT OVERTIGHTEN.
Restore power is ready for operation.
Glass Shades
Blubs