Hinkley 902466FBN-LWD, Инструкция по эксплуатации, Страница: 13 / 66

INSTALLING THE LED ASSEMBLY AND LIGHT COVER
1
2
3
4
5
5
Remove one of the three screws on the mounting hub
located on the fan motor. (Fig. 1)
While holding the LED assembly under your fan, make the
polarized plug connections: (Fig. 1)
- Red to white
- Black to black
NOTE: If you do not plan to install the LED assembly with
your fan at this time, don’t make the wire connections.
Remove the screws and take out the glass shade form the
light cover (Fig. 2), then attach the metal Plate to the light
cover B and light cover A with the screws provided. (Fig. 3)
Fig. 1
Tuck connections neatly into LED assembly, place the LED
assembly to the mounting hub with 3 screws provided. (Fig. 1)
Raise the light cover against the LED assembly and turn
clockwise until snug, DO NOT OVERTIGHTEN. (Fig. 1)
Restore power and your light kit is ready for operation.
©2019 Hinkley Lighting, Inc.
|
hinkley.com
|
11
Fig. 2
Light
Cover B
Light
Cover A
Glass
Shade
Screws
Fig. 3
Light
Cover B
Light
Cover A
Metal Plate
Screws
Screws
LED
Assembly
Mounting Hub
(bottom of motor)
Wire connectors
Light Cover