Hinkley 902466FBN-LWD, Инструкция по эксплуатации, Страница: 12 / 66

10
|
hinkley.com
BLADE ATTACHMENT
NOTE:
Cordless power screwdrivers are NOT recommended,
as they usually strip the heads of the screws and
usually will not fully compress the lock washers on
the motor screws. Use a large flat blade screwdriver
for final tightening to fully compress the washers. This
will help ensure proper alignment of the blades and
noise-free, wobble-free running.
Screws
Blades
Screws
Rubber Washers
Place rubber washer on screw. Insert this assembly
through the blade and start the screw into the blade
arm. Repeat this procedure without tightening the
screw until all 3 screws have been started into the
blade arm.
NOTE: Make sure that concave side of blade is facing
down.
Tighten each screw starting with center screw.
Fasten blade assembly to motor with provided screws
and lockwashers. Repeat procedure for remaining
blades. Make sure screws are TIGHT! Loose motor
screws can contribute to unnecessary hum during
operation.
1
2
3