HIMS Smart Beetle, Руководство пользователя, Страница: 18 / 27

9) You are prompted that you must restart JAWS for the settings to take effect.
Restart JAWS for Windows, and Braille should begin displaying.
4.5 Using Smart Beetle as a Braille display with NVDA
Use the following instructions to set up the Smart Beetle for use as a Braille display
with the free NVDA screen reader from NV Access.
1) Make sure Smart Beetle is powered on and in "Pairing BRL" or "USB" Mode.
If you are using USB, please connect the device to your computer via the
included USB cable.
2) Press "NVDA key-N" to open the NVDA menu.
3) Arrow down to "Preferences" and press "Enter".
4) Arrow down to "Braille Settings" and press "Enter".
5) Choose "HIMS Braille Sense" from the Braille Display combo box.
6) Tab to the "Port" combo box and ensure that it is set correctly. (NVDA
employs automatic port detection, so you should not need to change this setting)
7) Tab among the various combo boxes to choose options such as output and
Input tables, cursor options, etc. Use the Up and Down arrows to navigate
among the choices in each combo box.
8) When you have finished selecting your settings, Tab to "OK" and press
"Enter".
- Note: Make sure the "Save configuration on Exit" box is checked in the NVDA
menu in order to ensure your settings for the Smart Beetle are saved, thus the HIMS
Braille device will automatically connect each time you use NVDA in the future.
4.6 Using the Smart Beetle with System Access
Currently, The Smart Beetle works with System Access using only a Bluetooth
connection. To use your Smart Beetle as a Braille display with System Access,
ensure it is powered on, it is in "Pairing BRL" Mode, and that it has been paired with
your PC. When System Access is started, the device is automatically detected, and
Braille begins displaying.
4.7 Using Smart Beetle with VoiceOver on the Mac
To use a Smart Beetle as a USB braille display with a Mac running VoiceOver, you
can simply power on the device, make sure it is in "USB" Mode and connect it to the
Mac via USB. The unit is immediately recognized and VoiceOver output is shown on
the Braille display.
Use the following steps to connect the Smart Beetle as a Bluetooth Braille display
with a Mac running VoiceOver:
1) Ensure that the unit is powered on, Bluetooth is activated, and it is in "Pairing
BRL" Mode.
2) Press Vo-F8 to open the voiceOver Utility.