HIMS Smart Beetle, Руководство пользователя, Страница: 15 / 27

http://www.himsintl.com/upload/JAWS/HIMS_Braille_Driver_For_Jaws_V2_1.
zip
2) Unzip the compressed file and execute "Braille_SENSE_USB_Driver.exe.
3) When the "Smart Beetle USB Driver Setup wizard" appears, select the
"Install" button.
4) When the installation wizard appears, select the "Next" button.
5) When the drivers are successfully installed, press the "Finish" button.
6) Connect the Smart Beetle to the PC via the USB cable, and make sure it is in
Terminal Mode.
7) A. if using windows 7/8, Windows will locate and automatically install the
drivers. If running XP, please use step B, and the subsequent numbered
steps.
B. When the "Found New Hardware Wizard" appears, select "Install from a
specific location" using the "Down arrow", and then press the "Next" button.
8) When the "Please choose your search and install option" message appears,
select "Don't search. I will choose the driver to install", and press the "Next"
button.
9) You are prompted to "Select the device driver you want to install for this
hardware", select "HIMS USB DRIVER" and press the "Next" button.
10) "Completing the Found New Hardware Wizard" should appear. Select the
"Finish" button.
When you have finished installation of the USB driver on the PC, please follow the
instructions for connecting the display with your screen reader via USB.
4.2 Connecting to PC via Bluetooth serial port
The following steps will walk you through setting up the Smart Beetle to be used as a
Bluetooth Terminal for Screen Reader. These instructions assume that you already
have Bluetooth installed on your computer. The following instructions also assume
that you are running at least Windows XP, Service Pack 2.
Before you begin, make sure that your Smart Beetle is turned on, in "Pairing BRL"
mode, and be aware of the unit's designated Bluetooth name.
1. Instructions for windows XP
1) Navigate to the Bluetooth icon in the System Tray. You may open the
system tray by pressing "windows key-
b” and then press the Right or Left
Arrow Key until you reach the Bluetooth icon. Then, press the
"Applications" key".
Note: If the Bluetooth icon does not appear in the System Tray, you may
have to change the settings for the Bluetooth icon to appear. Go to the
Windows Control Panel, Bluetooth Devices, Options, and check the check
box that says "Show the Bluetooth Icon in the Notification Area".