Quick Start Guide – Blaze EZ
9
8. Basic Interface and Programming
Much of the programming on the Blaze EZ is easily executable
via dedicated buttons.
8.1. Recording
Press the round button below and to the left of the Power
button to record and access saved recordings. A quick press of
the Record button brings up a list of recordings saved on the
unit. To make a new recording, press and hold the Record
button for 2 seconds. You will hear a chime indicating
recording has started. While recording, you can press the
Record button to pause and resume recording. When you are
finished recording, press the Select button. The recording is
saved, and you are placed at the location from which you
initiated recording.
To delete a recording, from the recordings list, press and hold
the "Cancel" key.
8.2. Music
Below the record button are 3 square buttons as described in
section 1. The button on the left, labeled with an m in Braille
opens the Media Player. If you have played media files
previously, the last file you played begins playing. If you have
not played media files, the first media file in your collection
begins playing. While playing media files, the same Media
button that opened the Media Player serves as the Play/Pause
key.
During Playback you can change speed and pitch by pressing
the Voice Control button to change which setting is being
adjusted, then use the Volume dial to adjust the setting. Note:
after a few seconds, the Volume dial will return to its normal
