6
T6:
螺絲鎖緊時由變壓器背板
( Finish )
輸出之信號
,
時間長短之決定為螺絲鎖緊後至
Stop
信號輸入為止
.
Signal output by the backboard (Finish) of the transformer when the screw is locked, lasting for a period from the time when the screw
is locked until the input of Stop signal.
T7 :
為停止信號
(
應大於
0.5
秒
),
其說明如下
:
Indicating the stop signal (required to be longer than 0.5 second), which is explained as follows:
1:
如於電動起子旋轉中
,
則此信號之輸入將可停止電動起子之旋轉
.
If the electric driver is rotating, input of this signal may stop the rotation of the electric driver.
2:
如螺絲已經鎖緊
,
則此信號將可打開
Finish
輸出
(Open).
If the screw is locked, the signal may open Finish output (Open).
3:
當有
Start
信號存在時
, Stop
信號將不被接授
.
兩信號至少需間隔
0.5
秒
.
When the Start signal exists, Stop signal will not be accepted. A minimum interval of 0.5 second is required between the two signals.
T8 :
停止信號與啟動信號之間隔應大於
0.5
秒
.
The interval between the stop signal and start signal shall be longer than 0.5 second.
六 輸入信號
:
VI. Input signal
