HIMA HIMax X-MIO 6 01, Руководство пользователя

Страница: 51 / 72

X-MIO 7/6 01 4 Start-up
HI 801 305 E Rev. 5.00 Page 51 of 72
4.5.6 Tab: I/O Submodule DI 02: Channels
The
I/O Submodule DI 02: Channels
tab contains the following system parameters for each
input. Global variables can be assigned to the statuses and parameters with
->
and used in the
user program. The value without
->
must be directly entered.
Name Data type R/W Description
Channel no. --- R Channel number, defined by default
T on [µs] UDINT W Time on delay
Default setting: 0
It is only displayed in the redundancy group tab!
T off [µs] UDINT W Time off delay
Default setting: 0
It is only displayed in the redundancy group tab!
Sup. used BOOL W Activated: DI supply errors affect the
-> Channel OK
parameter.
Deactivated: Error in the DI supply does not affect the
-> Channel OK
parameter.
Default setting: Activated
It is only displayed in the redundancy group tab!
-> Channel Value
[BOOL] BOOL
R Binary value in accordance with the switching level LOW
(dig) and HIGH (dig).
TRUE: Channel energized
FALSE: Channel de-energized
-> Channel OK BOOL R TRUE: Faultless channel
The channel value is valid.
FALSE: Faulty channel
The channel value is set to FALSE.
Table 31: Tab I/O Submodule DI 02: Channels in the Hardware Editor