HIMA HIMax X-MIO 6 01, Руководство пользователя

Страница: 10 / 72

2 Safety X-MIO 7/6 01
Page 10 of 72 HI 801 305 E Rev. 5.00
2 Safety
All safety information, notes and instructions specified in this manual must be strictly observed.
The product may only be used if all guidelines and safety instructions are adhered to.
This product is operated in accordance with SELV or PELV. No imminent danger results from
the module itself. The use in Ex-Zone is permitted if additional measures are taken.
2.1 Intended Use
HIMax components are designed for assembling safety-related controller systems.
When using the components in the HIMax system, comply with the following general
requirements
2.1.1 Environmental Requirements
Requirement type Range of values
Protection class Protection class III in accordance with IEC/EN 61131-2
Ambient temperature 0...+60 °C
Storage temperature -40...+85 °C
Pollution Pollution degree II in accordance with IEC/EN 61131-2
Altitude < 2000 m
Housing Standard: IP20
Supply voltage 24 VDC
Table 2: Environmental Requirements
Exposing the HIMax system to environmental conditions other than those specified in this
manual can cause the HIMax system to malfunction.
2.1.2 ESD Protective Measures
Only personnel with knowledge of ESD protective measures may modify or extend the system
or replace modules.
NOTE
Device damage due to electrostatic discharge!

When performing the work, make sure that the working area is free of static and wear
an ESD wrist strap.

If not used, ensure that the device is protected from electrostatic discharge, e.g., by
storing it in its packaging.