HIMA HIMax X-AO 16 01, Руководство пользователя, Страница: 42 / 52

5 Operation X-AO 16 01
Page 42 of 52 HI 801 111 E Rev. 4.00
5 Operation
The module runs within a HIMax base plate and does not require any specific monitoring.
5.1 Handling
Direct handling of the module is not foreseen.
The module is operated from within the PADT, e.g., for forcing the analog outputs. For
more details, refer to the SILworX documentation.
5.2 Diagnosis
LEDs on the front side of the module indicate the module state, see Chapter 3.4.2.
The module diagnostic history can also be read using the programming tool SILworX.
Chapter 4.3.4 and Chapter 4.3.5 describe the most important diagnostic statuses.
i
If a module is plugged in to a base plate, it generates diagnostic messages during its
initialization phase indicating faults such as incorrect voltage values.
If these messages only occur before the entire system is operated, they do not indicate a
module fault.