HIMA HIMatrix F2 DO 16 01, Описание продукта

Страница: 26 / 40

4 Start-Up F2 DO 16 01
Page 26 of 40 HI 800 159 E Rev. 1.01
4.3.2.1
Module
Tab
The
Module
tab contains the following system parameters.
System parameter Data
type R/W Description
DO.Error Code WORD R Error codes for all digital outputs
Coding Description
0x0001 Fault within the digital outputs
0x0002 MOT test of safety shutdown returns a fault
0x0004 MOT test of auxiliary voltage returns a fault
0x0008 FTT test of test pattern faulty
0x0010 MOT test of output switch test pattern faulty
0x0020 MOT test of output switch test pattern
(shutdown test of the outputs) faulty
0x0040 MOT test active shutdown via WD faulty
0x0100 Outputs 1...4 and 9...12 de-energized due
to total current overrun
0x0200
Outputs 5...8 and 13...16 de-energized due
to total current overrun
0x0400 FTT test: 1st temperature threshold
exceeded
0x0800 FTT test: 2nd temperature threshold
exceeded
0x1000 FTT test: Monitoring of auxiliary voltage 1:
Low voltage
0x2000
FTT test: Monitoring of auxiliary voltage 2:
Low voltage
Module Error Code WORD R Module error code
Coding Description
0x0000
I/O processing, if required with errors, see
other error codes
0x0001 No I/O processing (device not in RUN)
0x0002 No I/O processing during the booting test
0x0004 Manufacturer interface operating
0x0010 No I/O processing: incorrect configuration
0x0020 No I/O processing: fault rate exceeded
0x0040/
0x0080 No I/O processing: configured module not
plugged in
Module SRS UDINT R Slot number (System Rack Slot)
Module Type UINT R Type of module, target value: 0x005A [90
dec
]
Table 16: SILworX - System Parameters for Digital Outputs,
Module
Tab