Hilti XBT 4000-A, Руководство по эксплуатации

Страница: 15 / 101

11
en
ORIGINAL OPERATING INSTRUCTIONS
XBT4000-A drill
1. General information
1.1 Signal words
-CAUTION-
Used to draw attention to a potentially dangerous situ-
ation which could lead to minor personal injury or dam-
age to the equipment or other property.
-NOTE-
Used to draw attention to an instruction or other useful
information.
1.2 Pictograms
Contents Page
1. General information 11
2. Description 12
3. Insert tools and accessories 12
4. Technical data 13
5. Safety rules 14
6. Before use 16
7. Operation 16
8. Care and maintenance 18
9. Troubleshooting 19
10. Disposal 19
11. Manufacturer's warranty – tools 20
12. Declaration of conformity (original) 20
Operating controls and components
On / off switch (with electronic speed control)
Lockbutton for sustained operation
Chuck
Cooling air exit
Rating plate
Gearing
Scaffold hook
Belt hook
Motor
Grip
Battery release button
Motor cooling air intake
These numbers refer to the corresponding illustra-
tions. The illustrations can be found on the fold-out
cover pages. Keep these pages open while studying the
operating instructions.
In these operating instructions, the designation “the tool”
always refers to the XBT 4000-A with battery fitted.
Location of identification data on the tool
The type designation, item number, year of manufacture
and revision level are printed on the type plate on the tool.
The serial number can be found on the left side of the
motor housing. Make a note of this information in your
operating instructions and always refer to it when
making an enquiry to your Hilti representative or service
department.
Type: XBT 4000-A
Serial no.:
Warning signs
Symbols
Obligation signs
It is essential that the operating instructions
are read before the tool is operated for the
first time.
Always keep these operating instructions
with the tool.
Ensure that the operating instructions are
with the tool when it is given to other per-
sons.
General warning Warning: electricity
Warning: caustic
substances
Read the operating
instructions before
use.
Return waste material
for recycling.
Wear eye
protection
Wear
breathing
protection
Wear ear
protection
Wear
protective
gloves
Safety helmet
must be worn
Printed: 08.07.2013 | Doc-Nr: PUB / 5071408 / 000 / 01