![background image](http://html1.mh-extra.com/html/hilti/te-drs-m/te-drs-m_operating-instructions-manual_2135500016.webp)
Suction head (Ø)
4…16 mm
Dust container regeneration cycles
Standard filter: Up to 100
HEPA filter: Up to 200
5 Safety instructions
WARNING! Read all instructions!
Observe all applic-
able safety rules and the operating instructions for the
Hilti rotary hammer used. Failure to observe the instruc-
tions could lead to serious personal injury. SAVE THESE
INSTRUCTIONS
5.1 Dusts
This appliance collects a significant percentage of, but
not all, the dust generated.
Dust from material such as paint containing lead, some
wood species, minerals and metal may be harmful. Con-
tact with or inhalation of the dust may cause allergic
reactions and/or respiratory diseases to the operator or
bystanders. Certain kinds of dust are classified as car-
cinogenic such as oak and beech dust especially in
conjunction with additives for wood conditioning (chro-
mate, wood preservative). Material containing asbestos
must only be treated by specialists.
Where the use of a
dust extraction device is possible it shall be used. To
achieve a high level of dust collection, use a suitable
vacuum cleaner of the type recommended by Hilti for
wood dust and/or mineral dust together with this tool.
Ensure that the workplace is well ventilated. The use
of a dust mask of filter class P2 is recommended. Fol-
low national requirements for the materials you want
to work with.
6 Before use
6.1 Fitting the dust removal module
2
NOTE
Dust may be released when the filter container is full.
Accordingly, the container should be emptied regularly.
Wear respiratory protection when doing this.
NOTE
The suction fan incorporated in the dust module is driven
by the motor of the tool by way of a push-in coupling.
The toothing on the rotor shaft meshes with the toothed
sleeve on the dust module.
1. Unplug the supply cord from the power outlet or, if
using a cordless tool, move the forward / reverse
switch to the middle position.
2. Position the dust module on the guides and push it
onto the tool until it engages.
6.2 Removing the dust module
CAUTION
The dust module drive pin may become hot during use.
Avoid touching this part.
1. Unplug the supply cord from the power outlet or, if
using a cordless tool, move the forward / reverse
switch to the middle position.
2. Press the release buttons and hold them in this
position.
3. Pull the dust module downwards away from the tool.
en
9
Printed: 08.07.2013 | Doc-Nr: PUB / 5071278 / 000 / 02
Содержание TE DRS-M
