Hilti TE DRS-B, Оригинальная инструкция по эксплуатации

Страница: 9 / 16

*249449*
249449 English 5
Trouble or fault Possible cause Action to be taken
An excessive amount of dust
is generated.
Suction channel clogged.
▶
Clean the suction channel.
Exposed accessory tool length
more than 125 mm.
▶
Use a shorter accessory tool or
use the long suction head.
TE DRS­B dust removal mod-
ule falls off
Dust removal module not correctly
installed.
▶
Adapter must be pushed all the
way on to the tool holder and
into the suction base. See the
section headed "Installing dust
removal module" → page 3.
Adapter and tool holder are oily or
greasy.
▶
Use a cloth to wipe oil and
grease off the adapter and the
outside surfaces of the tool
holder.
Clamping mechanism damaged.
▶
Replace clamping mechanism
(toggle lever and clamping
band).
Wrong adapter selected.
▶
Select the correct adapter.
8 Disposal
Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The
materials must be correctly separated before they can be recycled. In many countries, your old tools,
machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative
for further information.
▶
Do not dispose of power tools, electronic equipment or batteries as household waste!
9 Manufacturer’s warranty
▶
Please contact your local Hilti representative if you have questions about the warranty conditions.
10 Further information
For more information on operation, technology, environment and recycling, follow this link:
qr.hilti.com/manual/?id=2494449
This link is also to be found at the end of the operating instructions, in the form of a QR code.