Hilti TE DRS-B, Оригинальная инструкция по эксплуатации

Страница: 7 / 16

*249449*
249449 English 3
module can fall off. Remove oil and grease from the adapter and from the outside surfaces of the tool
holder with a cloth.
▶
Make sure that the module does not get too hot. The material will melt at temperatures above 80 °C.
▶
Do not use the module as a grip for carrying or guiding the system. The power tool has grips designed
for this purpose; use these grips.
▶
When the power tool is in operation, do not hold it by the suction head.
3 Description
3.1 Product overview 1
@
Suction base
;
Toggle lever
=
Y adapter
%
S adapter
&
Suction head, short
(
Suction head, long
3.2 Intended use
The product described is a dust removal module that is used as an accessory in combination with Hilti
breakers and dust extractors.
3.3 Items supplied
Suction base, toggle lever, S adapter, Y adapter, suction head short, suction head long, operating instructions
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
4 Technical data
Suction head, long Suction head, short
Weight ≤ 590 g ≤ 440 g
Dimensions (L × W × H) 340 mm × 152 mm × 98 mm 201 mm × 152 mm × 98 mm
Tool type Pointed chisels, flat chisels,
bushing tools
Pointed chisels, flat chisels,
bushing tools
Length of drill bit / chisel
400 mm … 500 mm 290 mm … 390 mm
Ambient temperature for operation −17 ℃ … 60 ℃ −17 ℃ … 60 ℃
Storage temperature −20 ℃ … 70 ℃ −20 ℃ … 70 ℃
5 Operation
5.1 Fitting the dust removal module 2
The exposed length of the accessory tool projecting from the suction head must be no more than 125
mm and no less than 30 mm. This will ensure optimum dust extraction.
Use only the pointed chisels, flat chisels and bushing tools shown in Fig. 2.
When installing, make sure that there is no accessory tool inserted in the power tool.
1. Select the appropriate adapter and push the adapter all the way on to the tool holder.
2. Open the toggle lever on the suction base.
3. Push the suction base, with the toggle lever open, all the way on to the adapter.