Hilti TE 6-A36, Руководство по эксплуатации

Страница: 24 / 252

of exposure. The declared vibration emission level represents the main applications of the tool. However if the tool is
used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total working period. An estimation of the level of exposure to
vibration should also take into account the times when the tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety
measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
Noise and vibration information (measured in accordance with EN 60745‑2‑6):
Typical A-weighted sound power level 99 dB (A)
Typical A-weighted emission sound pressure level. 88 dB (A)
Uncertainty for the given sound level 3 dB (A)
Triaxial vibration values (vibration vector sum) Measured in accordance with EN 60745‑2‑6
Hammer drilling in concrete, a
h, HD
9 m/s²
Drilling in metal, a
h, D
< 2.5 m/s²
Uncertainty (K) for triaxial vibration value 1.5 m/s²
Other information about the power tool
Chuck TE‑C Click
Battery B 36/2.4 Li‑Ion B 36/2.6 Li‑Ion B 36/3.0 Li‑Ion B 36/3.3 Li‑Ion B 36/3.9 Li‑Ion
Rated voltage 36 V 36 V 36 V 36 V 36 V
Capacity 2.4 Ah 2.6 Ah 3.0 Ah 3.3 Ah 3.9 Ah
Energy capacity 86.4 Wh 93.6 Wh 108.0 Wh 118.8 Wh 140.4 Wh
Weight 1.17 kg 1.17 kg 1.17 kg 1.6 kg 1.65 kg
Type of cell Li-ion Li-ion Li-ion Li-ion Li-ion
Temperature
monitoring
NTC NTC NTC NTC NTC
Deep discharge
protection
Yes Yes Yes Yes Yes
5 Safety instructions
NOTE
The safety rules in section 5.1 contain all general safety
rules for electric tools which, in accordance with the
applicable standards, must be listed in the operating
instructions. Accordingly, some of the rules listed may
not be relevant to this tool.
5.1 General power tool safety warnings
a)
WARNING
Read all safety warnings and all instructions. Fail-
ure to follow the warnings and instructions may result
in electric shock, fire and/or serious injury. Save all
warnings and instructions for future reference.
The term “power tool” in the warnings refers to
your mains-operated (corded) power tool or battery-
operated (cordless) power tool.
5.1.1 Work area safety
a) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b) Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while operat-
ing a power tool. Distractions can cause you to lose
control.
5.1.2 Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any ad-
apter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce
risk of electric shock.
en
19
Printed: 08.07.2013 | Doc-Nr: PUB / 5071090 / 000 / 02