Hilti SPN 6--A22, Оригинальная инструкция по эксплуатации, Страница: 24 / 192

18 English 2253586
*2253586*
3.5 Li-ion battery charge status display
The charge status of the Li­ion battery is displayed after one of the two battery release buttons is pressed.
Status Meaning
4 LEDs light. Charge status: 75 % to 100 %
3 LEDs light. Charge status: 50 % to 75 %
2 LEDs light. Charge status: 25 % to 50 %
1 LED lights up. Charge status: 10 % to 25 %
1 LED flashes. Charge status: < 10 %
Indication of the charge status is not possible while the power tool is in operation or immediately
after operation. If the battery charge status LEDs flash, please refer to the information given in the
Troubleshooting section.
4 Technical data
The nibbler comes with the SPN­CN accessory tool as standard. The SPN­RN and SPN­RL accessory tools
are available as optional accessories.
SPN­CN SPN­RN SPN­RL
Rated voltage 21.6 V 21.6 V 21.6 V
Weight in accordance with EPTA Procedure 01
including B22⁄8.0 battery
3.1 kg 3.0 kg 3.3 kg
Stroke rate at idle speed
620 /min …
1,370 /min
620 /min …
1,370 /min
620 /min …
1,370 /min
Starting hole diameter 17 mm 24 mm 24 mm
Smallest radius for curved cut-outs 4.0 mm •/• •/•
Radius •/• 50 mm 50 mm
Cutting track width 8.0 mm 5.0 mm 5.0 mm
Permissible steel thickness, steel up to
400 N⁄mm²
2.0 mm / 14 ga 2.0 mm / 14 ga 2.0 mm / 14 ga
Permissible steel thickness, steel up to
600 N⁄mm²
1.5 mm / 16 ga 1.5 mm / 16 ga 1.5 mm / 16 ga
Permissible steel thickness, steel up to
800 N⁄mm²
1.0 mm / 20 ga 1.0 mm / 20 ga 1.0 mm / 20 ga
Permissible material thickness, aluminum up to
250 N⁄mm²
2.5 mm / 10 ga 3.0 mm / 9 ga 3.0 mm / 9 ga
4.1 Battery
Battery operating voltage 21.6 V
Ambient temperature for operation −17 ℃ … 60 ℃
Storage temperature −20 ℃ … 40 ℃
Battery charging starting temperature −10 ℃ … 45 ℃
4.2 Noise information and vibration values in accordance with EN 62841
The sound pressure and vibration values given in these instructions were measured in accordance with a
standardized test and can be used to compare one power tool with another. They can also be used for a
preliminary assessment of exposure.
The data given represent the main applications of the power tool. However, if the power tool is used for
different applications, with different accessory tools, or is poorly maintained, the data can vary. This can
significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the tool is switched off, or
when it is running but not actually being used for a job. This can significantly reduce exposure over the total
working period.