*2169940*
2169940
English
19
6.3
Switching on
▶
Press the control switch.
Speed can be controlled steplessly right up to maximum by varying how far the control switch is
pressed in.
6.4
Screwdriving
1. Set the torque and operating mode selector ring to the required torque.
2. Set the forward/reverse switch to the desired direction of rotation.
6.5
Drilling
1. Set the torque and operating mode selector ring to the
symbol.
2. Set the forward/reverse switch to the “forward” position.
6.6
Switching off
▶
Release the control switch.
6.7
Removing the accessory tool
CAUTION
Risk of injury by the accessory tool!
The accessory tool might be hot or have sharp edges.
▶
Wear protective gloves when changing the accessory tool.
1. Set the forward/reverse switch to the middle position or remove the battery from the power tool.
2. Push the locking sleeve on the hex socket forward.
▶
Hold the locking sleeve in this position.
3. Pull the accessory tool out of the chuck and release the locking sleeve.
7
Care and maintenance
WARNING
Risk of injury with battery inserted
!
▶
Always remove the battery before carrying out care and maintenance tasks!
Care and maintenance of the tool
• Carefully remove stubborn dirt.
• Clean the air vents carefully with a dry brush.
• Use only a slightly damp cloth to clean the casing. Do not use cleaning agents containing silicone as
these can attack the plastic parts.
Care of the Liion batteries
• Keep the battery free from oil and grease.
• Use only a slightly damp cloth to clean the casing. Do not use cleaning agents containing silicone as
these may attack the plastic parts.
• Avoid ingress of moisture.
Maintenance
• Check all visible parts and controls for signs of damage at regular intervals and make sure that they all
function correctly.
• Do not operate the product if signs of damage are found or if parts malfunction. Have it repaired
immediately by
Hilti
Service.
• After cleaning and maintenance, fit all guards or protective devices and check that they function correctly.
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare
parts, consumables and accessories approved by Hilti for use with the product can be found at your
local
Hilti Store
or online at:
www.hilti.group
.
Содержание SFD 22-A
