![background image](http://html1.mh-extra.com/html/hilti/sc-55w/sc-55w_original-operating-instructions_2136387025.webp)
*2092359*
2092359
English
19
Vibration information
230 V
110 V
Triaxial vibration value when cutting wood (a
h
)
1.77 m/s²
(5.81 ft/s²)
2.12 m/s²
(6.96 ft/s²)
Uncertainty (K)
1.5 m/s²
1.5 m/s²
5
Operation
5.1
Removing the saw blade
WARNING
Risk of burning injury.
A hot accessory tool, clamping flange or clamping screw and the sharp edges of the
saw blade present hazards.
▶
Wear protective gloves when changing saw blades.
1. Disconnect the supply cord plug from the power outlet.
2. Insert the hex key into the saw blade securing screw.
3. Press the drive spindle lock button and hold it in this position.
4. Turn the saw blade clamping screw with the hex key until the spindle lock button engages fully.
5. Release the clamping screw by turning the hex key in the direction of the direction-of-rotation arrow.
6. Remove the clamping screw from the outer clamping flange.
7. Open the pivoting guard by swinging it to the side and then remove the saw blade.
If necessary, the mounting flange can be removed for cleaning.
5.2
Install saw blade
CAUTION
Risk of damage
Unsuitable or incorrectly fitted saw blades may damage the saw.
▶
Only use blades which are suitable for this saw. Observe the direction-of-rotation arrow on the saw
blade.
▶
Use only saw blades equipped with a rated maximum permissible speed that is at least as high as the
maximum speed stated on the product.
1. Disconnect the supply cord plug from the power outlet.
2. Clean the mounting flange and the clamping flange.
3. Fit the outer clamping flange the right way round (i.e. facing the right direction).
4. Open the pivoting guard.
5. Fit the new saw blade.
6. Install the outer clamping flange the right way round.
7. Insert the clamping screw.
8. Insert the hex key into the saw blade clamping screw.
9. Secure the clamping flange with the clamping screw by turning it clockwise. At the same time, use one
hand to hold down the arbor lock button.
10. Before using the power tool, check that the saw blade is correctly seated and tightened securely.
5.3
Adjusting the cutting depth
1. Disconnect the supply cord plug from the power outlet.
2. Release the cutting depth adjustment clamping lever.
3. Lift the circular saw in a scissoring movement and set the cutting depth.
➥ The cutting depth is shown on the cutting depth scale.
For a clean-edged cut, set cutting depth to the thickness of the material plus 2 mm.
4. Secure the cutting depth adjustment clamping lever.
Printed: 20.02.2019 | Doc-Nr: PUB / 5223188 / 000 / 03
Содержание SC 55W
