Hilti PR 35, Руководство по эксплуатации, Страница: 30 / 135

6.2 Options for charging the battery
DANGER
The PRA 85 AC adapter is for indoor use only. Avoid
ingress of moisture.
6.2.1 Charging the battery in the tool
6 7
NOTE
When charging, check that the temperature is within the
recommended charging temperature range (0 to 40°C/
32 to 104°F).
1. Insert the battery in the battery compartment.
2. Turn the catch so that the charging cord socket on
the battery pack is visible.
3. Connect the charging cord from the AC adapter or
car charging connector to the battery.
4. During charging, the charge status is indicated by
the battery status LEDs on the tool (the tool must be
switched on).
6.2.2 Charging the battery outside the tool
8
NOTE
When charging, check that the temperature is within the
recommended charging temperature range (0 to 40°C/
32 to 104°F).
1. Remove the battery from the tool and connect it to
the AC adapter or car charging connector.
2. The red LED on the battery lights while charging is
in progress.
6.2.3 Charging the battery while the tool is in
operation
8
CAUTION
Avoid ingress of moisture. Moisture may cause a short
circuit resulting in a risk of burning injury or fire.
1. Swing the cover to the side so that the charging
cord socket becomes accessible.
2. Connect the charging cord from the AC adapter to
the battery.
3. The tool continues to operate while charging is in
progress.
4. During charging, the charging status is indicated by
the LEDs on the tool.
6.3 Battery use and care
Store the battery in a cool, dry place. Never store the
battery where it is exposed to direct sunlight or sources
of heat, e.g. on heaters / radiators or behind a motor
vehicle windscreen. Batteries that have reached the end
of their life must be disposed of safely and correctly to
avoid environmental pollution.
6.4 Fitting the battery
6
CAUTION
Before inserting the battery in the tool, check that
the terminals of the battery and the tool are free from
foreign objects.
1. Push the battery into the tool.
2. Turn the catch in a clockwise direction to the second
detent (the “locked” symbol is displayed).
6.5 Removing the battery
9
1. Turn the catch in a counterclockwise direction from
the second position back to the “open” position (the
“unlocked” symbol is displayed).
2. Pull the battery out of the tool.
6.6 Switching the tool on
Press the “On / off” button.
NOTE
After switching on, the tool begins the automatic leveling
process (takes max. 40 seconds). After completion of the
leveling process, the laser beam switches on and begins
to rotate in the normal direction. When leveling in the
horizontal plane the laser head rotates automatically at
medium speed and, when working in the vertical plane, a
reference point is projected downwards.
6.7 LED indicators
Please refer to section 2 “Description”.
6.8 Inserting batteries in the PRA 35
10
CAUTION
Do not use damaged batteries.
DANGER
Do not mix old and new batteries. Do not mix batteries of
different makes or types.
NOTE
The PRA 35 may be powered only by batteries manu-
factured in accordance with the applicable international
standards.
6.9 Pairing
NOTE
In the state supplied, the PR 35 rotating laser and the
PRA 35 remote control / laser receiver have not been
paired. They cannot operate together until they have
been paired.
The PR 35 rotating laser and the PRA 35 must be set
to operate as a pair before they can be used together.
Pairing the tools means that they are configured to com-
municate with each other. The PR 35 rotating laser then
receives signals only from the PRA 35 with which it has
been paired. Pairing makes it possible to work alongside
en
23
Printed: 08.07.2013 | Doc-Nr: PUB / 5070234 / 000 / 01