Hilti PR 30-HVSG, Оригинальная инструкция по эксплуатации

Страница: 28 / 96

20 English 2179604
*2179604*
Trouble or fault Possible cause Action to be taken
Shock warning.
Shock warning has been triggered.
▶
Make sure the rotating laser is
standing securely and is not
exposed to vibration.
▶
Adjust the shock warning
sensitivity setting.
▶
Deactivate the shock warning
function. → page 13
Laser position warning.
The laser is too steeply inclined,
leveling not possible.
▶
Bring the laser into an upright
position as far as possible.
▶
Switch the rotating laser on.
→ page 9
Inclination warning.
The laser receiver is outside the
automatic inclination range.
▶
Set the inclination of the laser
plane using the PRA 79 slope
adapter. → page 12
Surveillance mode warning.
The surveillance function is not
possible or is interrupted.
▶
Check the positions of the
rotating laser and laser receiver
and reposition if necessary.
▶
Remove obstacles from the
path of the laser beam (laser
plane).
▶
Then restart the surveillance
function.
▶
Use automatic alignment
with the surveillance func-
tion. → page 11
Height adjustment warning.
Automatic height adjustment is not
possible.
▶
The tripod is not paired. Pair the
tripod, rotating laser and laser
receiver.
▶
Switch on the tripod.
▶
Switch on the rotating laser.
Low battery in the rotating
laser.
Low battery in the rotating laser.
▶
Charge the battery.
Low battery in the laser re-
ceiver.
Low battery in the laser receiver.
▶
Charge the battery.
Low battery in the tripod.
Low battery in the tripod.
▶
Charge the battery.